U1501

U1501 LDP) CAM CAN CIR2





DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
- GO TO 2.
2.DTC CONFIRMATION
1. Turn ignition switch ON and wait for 2 seconds or more.
2. Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC "U1501" detected?
YES - U1501.
NO - How to Perform Efficient Diagnosis For an Electrical Incident.




Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS OF LANE CAMERA UNIT
Perform self-diagnosis of lane camera unit with CONSULT-III.
Is any DTC detected?
YES - GO TO 2.
NO - GO TO 4.
2.LANE CAMERA UNIT TROUBLE DIAGNOSIS
Perform trouble diagnosis of the lane camera unit. Automatic Transmission.
- GO TO 3.
3.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U1501" erased?
YES - INSPECTION END
NO - Replace ABS actuator and electric unit (control unit).
4.PROVISIONAL REPLACEMENT OF LANE CAMERA UNIT
Remove lane camera unit. Install a normal lane camera unit.
- GO TO 5.
5.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U1501" erased?
YES - Replace the lane camera unit.
NO - Replace ABS actuator and electric unit (control unit).