Tail Light Bulb: Service and Repair

REAR COMBINATION LAMP


Bulb Replacement


CAUTION:
- Disconnect the battery negative terminal or remove the fuse.
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

REAR TURN SIGNAL LAMP BULB
1. Remove rear combination lamp. Service and Repair.
2. Rotate the resin cap (1) counterclockwise and unlock it.





3. Turn rear turn signal lamp bulb socket (2) counterclockwise and unlock it.
4. Remove bulb (3).

CAUTION:
Seal packing cannot be reused.

Rear turn signal lamp: 12V - 21W (amber bulb)

STOP/TAIL LAMP
Replacement integral with rear combination lamp.

Stop/tail lamp: LED