Removal

HEATING / AIR CONDITIONING: HEATER WATER PUMP: REMOVAL

1. PRECAUTION

(a) w/ Navigation System for HDD:

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE REAR DECK FLOOR BOX Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE BATTERY SERVICE HOLE COVER Removal

5. REMOVE SERVICE PLUG GRIP Removal

6. REMOVE AIR CLEANER ASSEMBLY

HINT
Refer to the procedure for Remove Air Cleaner Assembly Removal.

7. CHECK TERMINAL VOLTAGE Removal

8. REMOVE HEATER WATER PUMP ASSEMBLY

(a) Remove the bolt and disengage the wire harness.





CAUTION:
Wear insulating gloves.

(b) Using pliers, grip the claws of the clip, slide the clip, and disconnect the 2 heater water hoses.





NOTICE:
* Do not apply any excessive force to the heater water hoses.
* Prepare a drain pan or cloth for when the cooling water leaks.

(c) Disconnect the connector.





(d) Remove the 2 bolts and heater water pump assembly.