Radio/Stereo: Service and Repair

Audio Unit









Removal and Installation

NOTE: It is not necessary to remove the audio unit to retrieve the part number. For additional information, refer to Satellite Radio Receiver Electronic Serial Number (ESN) Retrieval Service and Repair.

1. Remove the instrument panel finish panel. For additional information, refer to Instrument Panel and Console Instrument Cluster Finish Panel.

2. Remove the 2 screws and the clock.
- Disconnect the electrical connector.

3. Remove the 4 screws and the audio unit.
- Disconnect the electrical connectors and the antenna lead-in cable.

4. To install, reverse the removal procedure.