Brake Pedal Assy: Adjustments
INSPECTIONPedal Play and Clearance
Play and clearance inspection between brake pedal and floor panel with pedal depressed.
^ Check brake pedal play.
^ Check brake pedal height from dash lower panel (1) using Tool.
Tool number: - (J-46532)
^ Adjust height referring to the following specifications.
ADJUSTMENT
1. Loosen stop lamp switch and ASCD switch by turning it counterclockwise by 45°.
2. Loosen lock nut (A) on the input rod to rotate input rod for adjusting brake pedal height to the specified one, and tighten lock nut (A).
Refer to BR-16, "Exploded View" brake pedal height, specified torque. Service and Repair
CAUTION: Make sure the threaded end of input rod stays inside clevis.
3. With the pedal pulled and held by hand, press stop lamp switch and ASCD switch until its threaded end contacts stopper.
4. With the threaded end of the stop lamp switch and ASCD switch contacting the bracket, rotate the switch clockwise by 45° to secure.
CAUTION: Make sure that the clearance (C) between bracket and end of stop lamp switch and brake switch is within the standard. Refer to BR-12, "Inspection and Adjustment". Testing and Inspection
5. Check pedal play
CAUTION: Make sure that stop lamps goes off when pedal is released.
6. Start engine to check brake pedal depression height when depressed. Refer to BR-12, "Inspection and Adjustment". Testing and Inspection