Shifter CVT: Adjustments

Adjustment of CVT Position
1. Set the parking brake.

CAUTION: Make sure the vehicle cannot move with parking brake set.





2. Loosen the control cable nut and place the manual lever in "P" position.
3. Place the selector lever in "P" position.
4. Push the control cable in with a load of 9.8 N (approximately 1 kg, 2.2 lb). Release the cable and temporarily tighten the control cable nut.

NOTE: Do not move the manual lever. Make sure the manual lever stays in the "P" position.

5. Tighten the control cable nut.

CAUTION: Secure the manual lever when tightening nut.

Control cable nut: Refer to CVT-170, "Removal and Installation".
Service and Repair
6. Check the operation of the CVT. Refer to CVT-173, "Checking of CVT Position". Testing and Inspection