Shifter CVT: Adjustments

Adjustment of CVT Position

CAUTION:
Make sure that parking brake is applied before adjustment.

1. Loosen the control cable nut and place the manual lever in "P" position.
2. Place selector lever in "P" position.
3. Temporarily tighten the control cable nut.

NOTE:
Do not move the manual lever. Make sure the manual lever stays in the "P" position.

4. Tighten the control cable nut.
Control cable nut: Refer to CVT-171, "Removal and Installation". Service and Repair

CAUTION:
Secure the manual lever when tightening nut.

5. Check the operation of the CVT. Refer to CVT-173, "Checking of CVT Position". Testing and Inspection