Air Duct: Service and Repair

DUCTS AND GRILLES


Removal and Installation

Ducts











Grilles











CENTER VENTILATOR GRILLE RH, LH

Removal
Release the tabs using a suitable tool and then remove the center ventilator grille.

Installation
Installation is in the reverse order of removal.

UPPER DEFROSTER GRILLE

Removal
1. Pry from the rear (farthest from windshield) edge to release the tabs using a suitable tool.
2. Pry from the front (closest to windshield) edge to release the tabs using a suitable tool.
3. Remove the upper defroster grille.

Installation
Installation is in the reverse order of removal.

SIDE VENTILATOR GRILLE RH, LH

Removal
Release the tabs using a suitable tool and then remove the side ventilator grille.

Installation
Installation is in the reverse order of removal.

SIDE DEFROSTER GRILLE RH, LH

Removal
Release the tabs using a suitable tool and then remove the side defroster grille.

Installation
Installation is in the reverse order of removal.

SIDE VENTILATOR DUCT RH, LH

Removal
1. Remove the instrument panel assembly. Removal And Installation.
2. Remove the defroster nozzle.
3. Remove the side ventilator duct.

Installation
Installation is in the reverse order of removal.

DEFROSTER NOZZLE

Removal
1. Remove the instrument panel assembly. Removal And Installation.
2. Remove the defroster nozzle.

Installation
Installation is in the reverse order of removal.

SIDE DEFROSTER DUCT RH, LH

Removal
1. Remove the instrument panel assembly. Removal And Installation.
2. Remove the defroster nozzle.
3. Remove the side defroster duct.

Installation
Installation is in the reverse order of removal.

FRONT FOOT DUCT RH

Removal
1. Remove the glove box assembly. Removal And Installation.
2. Remove the front foot duct.

Installation
Installation is in the reverse order of removal.

FRONT FOOT DUCT LH

Removal
1. Remove the instrument lower finisher. Removal And Installation.
2. Remove the front foot duct.

Installation
Installation is in the reverse order of removal.

REAR FLOOR CONNECTOR DUCT

Removal
1. Push up to disengage the rear floor connector duct from the rear floor duct (LH).
2. Remove the rear floor connector duct.

Installation
Installation is in the reverse order of removal.

REAR FLOOR DUCT RH

Removal
1. Remove the floor carpet from the front floor area and remove the front floor spacer. Service and Repair.
2. Remove the rear floor duct bolt.
3. Remove the rear floor duct.

Installation
Installation is in the reverse order of removal.

REAR FLOOR DUCT LH

Removal
1. Remove the floor carpet from the front floor area and remove the front floor spacer. Service and Repair.
2. Remove the rear floor connector duct.
3. Remove the rear floor duct bolt.
4. Remove the rear floor duct.

Installation
Installation is in the reverse order of removal.