Drink Holders: Service and Repair

WM 683019 Removing and installing cup holder

Removing cup holder

Information

- To reduce the unclipping forces and thereby the risk of damage during removal, the removal steps must be carried out at the accessible connection points using a suitable tool.

1. Remove rubber mat -2- from cup holder -1- ( -A- ).
Lever out using a suitable tool if necessary.





Removing rubber mat

2. Unscrew screws -3- on cup holder -1-.





Removing cup holder

3. Unclip side trim panels -4- on the centre console -2- from the rear to the cup holder -1- using a suitable tool -A-.
4. Pull cup holder -1- out of the centre console -2-.





Disconnecting cigarette lighter plug connection

5. Release plug connection for the cigarette lighter -3- ( -a- ) and pull it off -arrow-.
6. Remove cup holder.

Replacing cup holder

1. Remove cigarette lighter from the cup holder. -> 906219 Removing and installing cigarette lighter - section on "Removing" 906219 Removing and installing cigarette lighter

Installing cup holder

1. The cup holder is installed in reverse order to removal.