Headlamp Washer Pump: Service and Repair

WM 927819 Removing and installing pump for headlight cleaning system

Preliminary work

1. Loosen reservoir for windscreen washer system. -> 926019 Removing and installing reservoir for windscreen washer system - section on "Removing" Service and Repair

Removing pump for headlight cleaning system

Information

Collect windscreen washer system fluid in a suitable container.





Installation position of pump for headlight cleaning system

1. Unclip electric line.
2. Release and pull off electric plug connection for fluid level sensor. -> 926719 Removing and installing fluid level sensor - section on "Removing" Service and Repair
3. Pull off water hose for headlight cleaning system.





Pulling off water hose

4. Release and pull off electric plug connection.





Pulling off electric plug connection

5. Pull the pump out of the rubber sleeve by turning it back and forward slightly.





Pulling off pump

Installing pump for headlight cleaning system

Information

Check rubber sleeves and clips and replace them if necessary.

1. Press the pump into the rubber sleeve by turning it back and forward slightly.





Pressing in pump

2. Plug in and lock electric plug connection.





Connecting electric plug connection

3. Clip electric line into the washer-fluid reservoir.
4. Press water hose for headlight cleaning system with the clip onto the pump connection.





Fitting water hose

5. Plug in and lock electric plug connection for fluid level sensor. -> 926719 Removing and installing fluid level sensor - section on "Installing" Service and Repair

Subsequent work

1. Secure reservoir for windscreen washer system. -> 926019 Removing and installing reservoir for windscreen washer system - section on "Installing" Service and Repair