Removal

PARKING BRAKE: PARKING BRAKE PEDAL: REMOVAL

REMOVAL

1. REMOVE YAW RATE AND ACCELERATION SENSOR
HINT: Refer to the instructions for Removal of the yaw rate and acceleration sensor Removal.

2. REMOVE REAR NO. 2 AIR DUCT Removal
3. REMOVE REAR NO. 1 AIR DUCT Removal
4. REMOVE FRONT NO. 2 FLOOR SILENCER





(a) Remove the front No. 2 floor silencer.
5. LOOSEN PARKING BRAKE





(a) Remove the lock nut and No. 1 wire adjusting nut to completely loosen the parking brake.

Text in Illustration





6. DISCONNECT NO. 4 PARKING BRAKE CABLE ASSEMBLY





(a) Holding the lock nut of the No. 1 parking brake cable assembly, loosen the turnbuckle of the No. 4 parking brake cable assembly to disconnect the No. 4 parking brake cable assembly from the No. 1 parking brake cable assembly.

Text in Illustration





7. REMOVE PARKING BRAKE PEDAL ASSEMBLY





(a) Disconnect the heated oxygen sensor connector and disengage the 2 clamps (for 2GR-FE).





(b) Disconnect the 2 connectors.





(c) Disengage the 4 clamps and separate the wire harness.
(d) Remove the nut and 4 bolts, and separate the No. 1 parking brake cable assembly from the body.









(e) Disconnect the parking brake switch connector.





(f) Remove the 3 nuts and parking brake pedal assembly.