883419 Removing and installing air guide for additional air conditioning
WM 883419 Removing and installing air guide for additional air conditioning
Information
Installation position
Installation position of air guide for additional air conditioning
Removing and installing air duct in wheel housing
Preliminary work
1. Remove centre part and left side panel of luggage compartment cover. -> 700619 Removing and installing luggage compartment trim (luggage compartment cover) - section on "Removing"
2. Remove side trim panel for rear left luggage compartment. -> 700319 Removing and installing side trim panel for rear luggage compartment - section on "Removing" Service and Repair
3. Remove temperature sensor. -> 885419 Removing and installing temperature sensor - section on "Removing" Service and Repair
Removing air duct in wheel housing
1. Carefully unclip locking lugs for the air guide -3- on the additional air conditioner.
Loosening locking lugs for air guide
2. Carefully remove the air guide -1-.
Removing air guide in wheel housing
Installing air duct in wheel housing
1. Installation is performed in reverse order.
Subsequent work
1. Install temperature sensor. -> 885419 Removing and installing temperature sensor - section on "Installing" Service and Repair
2. Install side trim panel for rear left luggage compartment. -> 700319 Removing and installing side trim panel for rear luggage compartment - section on "Installing" Service and Repair
3. Install centre part and left side panel of luggage compartment cover. -> 700619 Removing and installing luggage compartment trim (luggage compartment cover) - section on "Installing"
Removing and installing rear air duct
Preliminary work
1. Remove centre part and left side panel of luggage compartment cover. -> 700619 Removing and installing luggage compartment trim (luggage compartment cover) - section on "Removing"
2. Remove side trim panel for rear left luggage compartment. -> 700319 Removing and installing side trim panel for rear luggage compartment - section on "Removing" Service and Repair
3. Remove rear seat completely.
-> 724819 Removing and installing 2/3-split folding rear seat - section on "Removing" 724819 Removing and installing 2/3-split folding rear seat
-> 724819 Removing and installing 1/3-split folding rear seat - section on "Removing" 724819 Removing and installing 1/3-split folding rear seat
Removing rear air duct
1. Loosen the screw -1- on the left support for the luggage compartment cover and remove the support -2-.
Removing support for luggage compartment cover
2. Carefully detach the air guide -2- from the studs at the fastening points -15- and remove it.
Removing rear air duct
Installing rear air duct
1. Installation is performed in reverse order.
Subsequent work
1. Install rear seat completely.
-> 724819 Removing and installing 2/3-split folding rear seat - section on "Installing" 724819 Removing and installing 2/3-split folding rear seat
-> 724819 Removing and installing 1/3-split folding rear seat - section on "Installing" 724819 Removing and installing 1/3-split folding rear seat
2. Install side trim panel for rear left luggage compartment. -> 700319 Removing and installing side trim panel for rear luggage compartment - section on "Installing" Service and Repair
3. Install centre part and left side panel of luggage compartment cover. -> 700619 Removing and installing luggage compartment trim (luggage compartment cover) - section on "Installing"
Removing and installing air duct in tunnel
Preliminary work
1. Remove rear seat completely.
-> 724819 Removing and installing 2/3-split folding rear seat - section on "Removing" 724819 Removing and installing 2/3-split folding rear seat
-> 724819 Removing and installing 1/3-split folding rear seat - section on "Removing" 724819 Removing and installing 1/3-split folding rear seat
2. Remove centre console. -> 681719 Removing and installing centre console - section on "Removing" 681719 Removing and installing centre console
Removing air duct in tunnel
1. Carefully loosen the air duct -3- from the air distributor and remove it.
Removing air duct in tunnel
Installing air duct in tunnel
1. Installation is performed in reverse order.
Subsequent work
1. Install centre console. -> 681719 Removing and installing centre console - section on "Installing" 681719 Removing and installing centre console
2. Install rear seat completely.
-> 724819 Removing and installing 2/3-split folding rear seat - section on "Installing" 724819 Removing and installing 2/3-split folding rear seat
-> 724819 Removing and installing 1/3-split folding rear seat - section on "Installing" 724819 Removing and installing 1/3-split folding rear seat
Removing and installing air distributor with servo motor
Preliminary work
1. Remove centre console. -> 681719 Removing and installing centre console - section on "Removing" 681719 Removing and installing centre console
Removing air distributor with servo motor
1. Move front seat forward and up.
2. Release and pull off the connector -a- on the servo motor at the air distributor -5-.
Removing air duct with servo motor
3. Loosen fastening screw -A-.
4. Carefully remove the air distributor -5-.
Installing air distributor with servo motor
1. Installation is performed in reverse order.
Subsequent work
1. Install centre console. -> 681719 Removing and installing centre console - section on "Installing" 681719 Removing and installing centre console
Removing and installing air duct in bottom of B-pillar
Preliminary work
1. Remove B-pillar trim. -> 706719 Removing and installing B-pillar trim - section on "Removing" 706719 Removing and installing B-pillar trim
Removing air duct in bottom of B-pillar
1. Loosen the air duct -7- at the stud -15- and remove it carefully.
Removing air duct in B-pillar
Installing air duct in bottom of B-pillar
1. Installation is performed in reverse order.
Subsequent work
1. Install B-pillar trim. -> 706719 Removing and installing B-pillar trim - section on "Installing" 706719 Removing and installing B-pillar trim
Removing and installing air duct in top of B-pillar
Preliminary work
1. Remove B-pillar trim. -> 706719 Removing and installing B-pillar trim - section on "Removing" 706719 Removing and installing B-pillar trim
Removing air duct in top of B-pillar
1. Loosen the fastening screws -A-.
Removing air duct in top of B-pillar
2. Remove the air duct -11-.
Installing air duct in top of B-pillar
1. Installation is performed in reverse order.
Subsequent work
1. Install B-pillar trim. -> 706719 Removing and installing B-pillar trim - section on "Installing" 706719 Removing and installing B-pillar trim
Removing and installing air duct in rear footwell
Preliminary work
1. Remove air vent under the front seat. -> 887519 Removing and installing air vent - section on "Removing" 887519 Removing and installing air vent
Removing air duct in rear footwell
1. Loosen the air duct -9- at the studs -15- and remove it carefully.
Removing air duct in rear footwell
Installing air duct in rear footwell
1. Installation is performed in reverse order.
Subsequent work
1. Install air vent under the front seat. -> 887519 Removing and installing air vent - section on "Installing" 887519 Removing and installing air vent